Since the distributor less ignition system has two or more ignition coils or primary windings of ignition coils, the ignition controller generally has not only automatic power-off function, conduction angle control, constant current control and other circuits, but also cylinder discrimination circuit, multiple high-power triodes and corresponding control circuits

点火模块又称点火控制器，通过环境不同的要求，可选择金属探棒或紫外光敏管的配合使用，能够实现对自动点火，火焰指示，熄火报警，信号传送工作自动。点火模块具有体积小，重量轻，点火强，反应灵敏等特点，可广泛用于各种工业对气体或液体所产生的火焰进行监测，熄火保护。

Ignition module, also known as ignition controller, can be used with metal probe or UV photosensitive tube according to different environmental requirements, which can realize automatic ignition, flame indication, flameout alarm and signal transmission. The ignition module has the characteristics of small volume, light weight, strong ignition and sensitive response. It can be widely used in various industries to monitor and extinguish the flame generated by gas or liquid.

点火模块通电后电源指示灯亮(绿灯)，开关在ON/OFF状态下无上电反应，开启开关-ON-系统自检点火0.6秒后开启电磁阀，检测到有火焰信号，停止点火，工作指示灯亮(黄灯)。不着火点火时间为10秒，任意时间内熄火均可重点火，重点火期间检测到有火焰信号则进入正常工作状态，10秒内无火焰信号则关闭电磁阀报警指示灯亮(红色)。使用远传控制功能，需外接24VDC电源输入，通过开关的闭合实现对控制器进行开启，关闭控制。在汽车行业点火模块和混合集成电路（HIC）、点火开关、点火线圈、点火分电器组成点火系统。

After the ignition module is powered on, the power indicator light is on (green light), and the switch has no power on response in the on / off state. Turn on the switch - on - the system self checks the ignition, turn on the solenoid valve after 0.6 seconds, detect a flame signal, stop the ignition, and the work indicator light is on (yellow light). The ignition time without fire is 10 seconds. The key fire can be stopped at any time. If a flame signal is detected during the key fire, it will enter the normal working state. If there is no flame signal within 10 seconds, the solenoid valve will be closed and the alarm indicator light will be on (red). The remote control function requires external 24VDC power input, and the controller can be opened and closed by closing the switch. In the automotive industry, the ignition module, hybrid integrated circuit (HIC), ignition switch, ignition coil and ignition distributor constitute the ignition system.

以上就是点火控制器http:为大家介绍的内容，感谢您在百忙之中查看我公司的信息内容，如果您想要了解的更多，欢迎您来电进行咨询!

The above is the ignition controller http: Thank you for checking the information of our company in your busy schedule. If you want to know more, you are welcome to call for consultation!