The natural gas of ignition controller refers to all natural gases in nature, including gases formed by various natural processes in the atmosphere, hydrosphere and lithosphere (including oil field gas, gas field gas, mud volcanic gas, coalbed gas and biogenic gas, etc.). The general definition of "natural gas" for a long time is a narrow definition from the perspective of energy, which refers to the mixture of hydrocarbon and non hydrocarbon gases naturally contained in the formation. In petroleum geology, it usually refers to oil field gas and gas field gas. It is mainly composed of hydrocarbons and contains non hydrocarbon gases. Natural gas belongs to non renewable energy. Methane is widely distributed in nature. Methane is the simplest organic matter and the main component of natural gas, biogas and pit gas, commonly known as gas. It is also the hydrocarbon with the lowest carbon content (the largest hydrogen content) and the main component of natural gas, biogas, oilfield gas and coal mine pit gas. Therefore, methane is one of the components of natural gas and belongs to non renewable energy.

天然气烧嘴是现在社会和工业使用比较多的，天然气烧嘴是比较科学环保的，在这里虎博小编和您讲讲天然气烧嘴性能优点表现。

Natural gas burners are widely used in society and industry. Natural gas burners are more scientific and environmental friendly. Here, Hubo Xiaobian will tell you about the performance advantages of natural gas burners.

天然气烧嘴节能优势：天然气加热炉顶的短小烟囱很容易制成热交换器，将燃烧所需要的助燃风进行预热，做成蓄热式燃烧系统，从而提高热效率。

Energy saving advantages of natural gas burner: the short chimney on the top of natural gas heating furnace can easily be made into a heat exchanger to preheat the combustion supporting air required for combustion and make it into a regenerative combustion system, so as to improve the thermal efficiency.

天然气烧嘴的特点：

Characteristics of natural gas burner:

对于中小型锻造加热炉，天然气燃烧机一般装在顶部。对于中大型加热炉，烧嘴装在两侧。为了使炉膛温度均匀，应选用高速烧嘴。锻造加热所用的烧嘴一般不采用全自动机电一体化烧嘴，而采用自动分体式烧嘴，这样有利于得到高速火焰，也便于灵活的工艺控制。

For small and medium-sized forging heating furnaces, the natural gas burner is generally installed on the top. For medium and large heating furnaces, burners are installed on both sides. In order to make the furnace temperature uniform, high-speed burner should be selected. Generally, the burner used for forging heating does not adopt full-automatic electromechanical integration burner, but adopts automatic split burner, which is conducive to high-speed flame and flexible process control.

天然气烧嘴

Natural gas burner

天然气烧嘴是工业炉用油嘴或煤气烧嘴将油或煤气当作燃料来燃烧所使用部件的总称，是燃烧炉的核心部件。所以对燃气烧嘴的要求较高：

Natural gas burner is the general name of the components used by industrial furnace oil nozzle or gas burner to burn oil or gas as fuel. It is the core component of combustion furnace. Therefore, the requirements for gas burner are high:

1）燃气烧嘴燃烧效率高，在空气系数较低的情况下，达到完全燃烧。

1) The gas burner has high combustion efficiency and achieves complete combustion under the condition of low air coefficient.

2）燃气烧嘴燃烧稳定，可适应较大的负荷变化，调节比率大，燃烧温度能满足工艺要求。

2) The gas burner has stable combustion, can adapt to large load changes, large regulation ratio, and the combustion temperature can meet the process requirements.

3）燃气烧嘴火焰性能好，具有较高的速度和较大的刚性，辐射能力强。

3) The gas burner has good flame performance, high speed, high rigidity and strong radiation ability.

4）燃气烧嘴有较高的热回收能力，表现在可使用预热空气或预热煤气的能力，以降低能耗。

4) The gas burner has high heat recovery capacity, which is reflected in the ability to use preheated air or preheated gas to reduce energy consumption.

5）燃气烧嘴符合安全与环保规定，如噪声小、有害气体少、烟尘少等。

5) The gas burner complies with the safety and environmental protection regulations, such as low noise, less harmful gas, less smoke and dust, etc.

6）燃气烧嘴结构简单、操作容易、维修方便、使用寿命长。天然气烧嘴是现在社会和工业使用比较多的，天然气烧嘴是比较科学环保的

6) The gas burner has the advantages of simple structure, easy operation, convenient maintenance, low price and long service life. Natural gas burners are widely used in society and industry. Natural gas burners are more scientific and environmental friendly